Hydraulic Wiper Seals A5 Pneumatic Sealing Ring

Introduction:

The function of the A5 type Dust Seals is to prevent dust, dirt, sand particles, or fine eyebrows from entering. This can be achieved through a special design that greatly protects the guide parts and extends the service life of the seals. The A5 dust ring does not require ring screws or brackets when installed. There is no need for strict tolerances or metal inserts. The dust ring is supplied as a continuous ring, which is easy to fit into the groove. Avoid pressure on the back of the Hydraulic Wiper Seal.

Application:

The A5 Wiper Ring is used for the axial control rod, plunger, and piston rod of hydraulic cylinders and cylinders.

Operating temperature: -35°C to +100°C

Surface speed: 2m/s

Material:

Standard material is polyurethane with Shore hardness of 93 degrees.

Installation:

The A5 type dust ring is easy to fit into a groove with a relatively simple structure. The lip of the dust ring should avoid contact with the piston rod eye or other connecting parts.