All Products

AS Buffer Ring NBR Pneumatic Hydraulic Seals

AS/PP type Buffer Ring NBR is a buffer seal specially designed for cylinders. It acts as a check valve in the entire sealing system and can automatically select a better buffer stroke, even in the case of slight eccentricity, because it can...

QR Star Seal Ring NBR Material Seals

KVK QR Star Seal Ring has a wide range of applications, but it is mainly used for dynamic sealing, but its use is limited by pressure and speed.Application of dynamic sealFor sealing reciprocating pistons, piston rods, plungers.Shafts or spindles...

Piston Sealing Z8 Radial Oil Seals Hydraulic Seals

Type Z8 Piston Sealing is a lip seal for cylinder pistons and valves. It requires small groove size, good sealing performance, and low dynamic and static friction. Easy to install and suitable for cushioning cylinders. Z8 type complies with IS03320...

MYA Universal Seal Piston Piston Rod NBR

MYA type can be used for piston and piston rod seals, such seals have a small cross-section, can be used for small cylinders, valve seals. Application of Sealing Ring MYA: Working pressure: ≤1.6MPa Working temperature: -30℃～+80℃ Reciprocating...

Small Size Rubber O Ring Dust Seals Nitrile

Nitrile O Ring Type PDR is a dust seal for cylinder rods. Rubber O Rings PDR application range: Working pressure: ≤1.6MPa Working temperature: -30C～+80C° Reciprocating speed: ≤1m/s Medium: Compressed air. Installation: To avoid damage to...

Rotary Seal VS NBR Material Sealing Ring

VS type sealing ring is an axially acting elastic rubber sealing ring, which is used as a pressureless seal for the rotating shaft. The oil leaks to the outside, and it can also prevent the intrusion of splashing water or dust from the outside. Type...

PPZ Hydraulic Piston Seals FKM Material Seal

PPZ type cylinder seals are used for cylinders and valves. This double-acting seal has low friction and has two miniature seals with grease accumulated in the middle. PPZ Piston Seal NBR application range: Working pressure: ≤1.2MPa Working...

Universal Seal Fkm Piston Rod Seals MYA

MYA type can be used for piston and piston rod seals, such seals have a small cross-section, can be used for small cylinders, valve seals. Application of Sealing Ring MYA: Working pressure: ≤1.6MPa Working temperature: -30℃～+80℃ Reciprocating...

SS Series HNBR O Rings High Quality Seal

HNBR O Rings Hydrogenated nitrile rubber: the O-ring made of nitrile rubber is part of the double chain removed from the nitrile rubber after hydrogenation. After hydrogenation, its temperature resistance and weather resistance are much higher than...

C1 Piston Rod Seal NBR Material of O-Ring

Type C1 Piston Rod Seal NBR meets the needs of hydraulic and pneumatic equipment for small structural seals, providing excellent sealing despite small seal cross-sections and heights. Due to the small sealing contact surface, friction is extremely...

Piston Seals High Quality Seals Made

The Piston Seals QYD type is a specialized seal designed for cylinders and pistons that meet Chinese standards. It can be used with the groove design specified by Chinese standard JB/T6656. The Hydraulic Piston Seals QYD has a wide application...

AGP Piston Seal NBR Material Construction Machinery Seals

Piston Seal NBR Type AGP is a special seal for pneumatic pistons. Nitrile O Ring AGP application range: Working pressure: ≤1.6MPa Working temperature: -30℃～+80℃ Reciprocating speed: ≤1m/s Media: Mineral oil, gas, water. Material: NBR with 80 Shore...

B7 Piston Seal PU Reciprocating Seals Industrial Seals

B7 type piston rod seal is a kind of lip seal installed in the groove as a tight fit. B7 seal can be used in various occasions where the physical properties of ordinary rubber or fabric reinforced rubber cannot meet the requirements. Scope of...

A5 Dust Seal Ring Bearing Dust Seal

The function of the A5 type dust ring is to prevent dust, dirt, sand or fines from entering. This can be achieved through a special design that greatly protects the guides and extends the life of the seal. The A5 wiper does not require eye screws or...

Rubber O Rings ZT Ring Sealing Hydraulic Gaskets

ZT Style Piston Seal NBR Double-Acting Cylinder Seals feature a narrower groove design for more stable operation than O Rings and to avoid torsional damage. Application range: Working pressure: ≤1.0MPa Working temperature: -20℃～+80℃ Surface...

Rotary Lip Seals VA Anti-Leakage and Anti-Fouling

VA type sealing ring is a kind of elastic rubber sealing ring acting in the axial direction. It is used as a pressureless seal for the rotating shaft. The sealing lip has good mobility and applicability. The oil leaks to the outside, and it can also...

Universal Seals Piston Piston Rod FKM Material MYA

MYA type can be used for piston and piston rod seals, such seals have a small cross-section, can be used for small cylinders, valve seals. Application of Sealing Ring MYA: Working pressure: ≤1.6MPa Working temperature: -30℃～+80℃ Reciprocating speed:...

SPGW Piston Seal Ring Rubber O Rings

SPGW type two-way piston seal is composed of PTFE piston seal ring, rubber spring and two anti withdrawal retaining rings, and is used for the piston seal of hydraulic cylinder. The SPGW is a high pressure operated seal that improves the SPG's...

High Quality Rotary Seal OER Industrial Seals

OER type shaft rotary seal is composed of wear-resistant low friction ring and O-ring, which is suitable for the occasion where the pressure alternates from one side of the seal to the other. Such as rotating track spindle, rotary joint and machine...

Rubber O Rings 3.1-3.5 Hydraulic seal

O-type rubber seal ring is a kind of sealing element with circular section, which is widely used in a variety of mechanical equipment and plays a sealing role in a certain temperature, pressure and different liquid or gas media. Compared with other...

Rod Seals KVK-UN O Rings Hydraulic Seals

Overview UN type seals are one-way acting sealing elements, in hydraulic cylinders, mainly used for piston rod sealing, in many applications, especially in mobile machinery, automobiles, forestry and mining machinery, under harsh working conditions...

Piston Rod Seal UTS Piston Sealing

Overview UTS type sealing ring is a one-way acting sealing element. In hydraulic cylinders, it is mainly used for piston rod sealing. It is more suitable for working under high pressure, especially in mobile machinery, automobiles, forestry and...

Piston Rod Seal QYD NBR O Rings

NBR O Rings QYD type is a special seal for cylinder and piston that conforms to Chinese standards. The groove design can adopt Chinese standard JB/T6656.Nitrile O Ring QYD application range:Working pressure: ≤1.6MPaWorking temperature:...

O Ring Sealing IDU Lip Engineering Mechanical Seal

Piston Rod Seal PU IDU type is a special piston seal suitable for the Chinese machinery and equipment market. The groove design can adopt Chinese standard JB/ZQ4265. Application of Polyurethane Seals: Working pressure: ≤32MPa (PU) Working...